Complete Set of CAMPUS® Data, ASTM Data, Biopolymer Database, Application Database, Tradename Database, Literature Database, Toolbox.

Material datasheets available free. Online registration at: www.materialdatacenter.com

Material Data Center is a leading international information system for the plastics industry. Material Data Center offers a comprehensive plastics database, calculation tools, CAE interfaces, a literature database and an application database. For more information about Material Data Center visit www.materialdatacenter.com.

This is the free Material Data Center Datasheet of Luran® S KR2868C - (ASA+PC) - INEOS Styrolution

Material Data Center offers the following functions for Luran® S KR2868C:
unit conversion, PDF datasheet print, comparison with other plastics, snap fit calculation, beam deflection calculation, CAE Interfaces

Check here, which other Luran S datasheets, application examples or technical articles are available in Material Data Center

Use the following short links to get directly to the properties of interest in this datasheet:
Características de processamento/físicas - Propriedades mecânicas - Propriedades térmicas - Propriedades elétricas - Outras propriedades
Any use of this information falls under the rules of our disclaimer.
Características de processamento/físicasValorUnidadeMétodo de ensaio
ISO Dados
Índice de fluidez volumétrico, MVR 20 cm³/10min ISO 1133
Temperatura 260 °C -
Carga 5 kg -
Propriedades mecânicasValorUnidadeMétodo de ensaio
ISO Dados
Módulo de tração 2400 MPa ISO 527
Tensão no escoamento 60 MPa ISO 527
Deformação no escoamento 4.6 % ISO 527
Resistência à flexão 80 MPa ISO 178
Res. impacto Charpy c/entalhe, +23°C 100 kJ/m² ISO 179/1eA
Res. impacto Charpy c/entalhe, -30°C 15 kJ/m² ISO 179/1eA
Ball indentation hardness 110 MPa ISO 2039-1
Propriedades térmicasValorUnidadeMétodo de ensaio
ISO Dados
Temperatura de deflexão térmica, 1.80 MPa 103[1] °C ISO 75-1/-2
Temperatura de deflexão térmica , 0.45 MPa 123[1] °C ISO 75-1/-2
Temperatura de amolecimento Vicat , A 130 °C ISO 306
Temperatura de amolecimento Vicat, B 118 °C ISO 306
Coef. de expansão térmica linear, paralelo 80 E-6/K ISO 11359-1/-2
1: annealed 4 h/80 °C
Propriedades elétricasValorUnidadeMétodo de ensaio
ISO Dados
Resistividade volumétrica específica 1E12 Ohm*m IEC 62631-3-1
Resistividade superficial específica 1E13 Ohm IEC 62631-3-2
Outras propriedadesValorUnidadeMétodo de ensaio
Absorção de água 0.7 % Sim. to ISO 62
Absorção de umidade 0.25 % Sim. to ISO 62
Densidade 1150 kg/m³ ISO 1183
Bulk density 600 kg/m³ -
Características
Forma de entrega
Granulos
Características especiais
Alto impacto., Estável contra o calor
Aplicaciones
Automóvel
Disponibilidade regional
Europa, Oriente/África
Disclaimer
Copyright Altair Engineering GmbH. Altair Engineering GmbH assumes no liability for the system to be free of errors. The user takes sole responsibility for the use of this data under the exclusion of every liability from Altair Engineering GmbH; this is especially valid for claims of compensation resulting from consequential damages. Altair explicitly points out that any decision about the application of materials must be double checked with the producer of this material. This includes all contents of this system. Copyright laws are applicable for the content of this system.
Created: Source: www.materialdatacenter.com


Material Data Center is provided by M-Base Engineering + Software GmbH. M-Base Engineering + Software GmbH assumes no liability for the system to be free of errors. Any decision about the application of materials must be double checked with the producer of this material.

Additional information about this material, like producer contact address, etc. can be found at www.materialdatacenter.com. For access to this extra information a registration is requested. Free online registration is available.